background image

TM-J9000/J9100 User’s Manual 

13

English

Inserting and Replacing Roll Paper 

CAUTION:

Be sure to use roll paper that meets the specifications. (See the 
specifications on page 25 of this manual for more details.)

To avoid injuries and/or machine failure, make sure not to touch 
anything other than the roll paper when the roll paper cover is open.

Note:

When the roll paper is disabled, you need not to install a paper roll.
Do not use paper rolls that have the paper glued or taped to the core. They may 
cause paper jams.
To prevent paper jams, make sure that nothing obstructs the paper coming out of 
the paper outlet and do not pull the paper being ejected.
Do not open the roll paper cover during printing or paper feeding.

1.

Turn on the printer power.

2.

Press the roll paper cover open button, and open the roll paper cover.

3.

If a roll paper core is inside the printer, remove it.

4.

Install a new paper roll.

Note:

Be sure that the paper comes off the roll in the correct direction.

5.

Pull out the edge of the paper roll within the range “A” on the upper 
side of the case, close the roll paper cover, and tear off the fed paper 
roll with the manual cutter.

A

Summary of Contents for TM-J9000 Series

































Reviews: