97
Chapter 4 Advanced Usage
Restore Default Values Mode (Restore Default Values)
In Restore default values mode, following values saved on NV Memory will be set back to initial settings. When
any error occurs, you can use to specify the reason.
Follow the steps below.
1
After running a self test, hold down the Feed button for at least one second to enter
the Mode selection.
The Mode selection guidance is printed, and the Paper LED flashes.
2
Briefly press the Feed button four times (less than one second), and then hold it
down for at least one second to enter the Restore Default Values.
The guidance is printed.
3
When only restoring the default settings:
Briefly press the Feed button once (less than one second), hold it down for at least one second.
(Hold down the Feed button until the message of restore completion is printed.)
When restoring default settings and deleting user defined data:
Briefly press the Feed button twice (less than one second), and then hold it down for at least one
second. (Hold down the Feed button until the restoration complete message is printed.)
4
To finish, turn off the power.
Setting Item
Restore Default
Restore Default & Delete Data
Customized value
✔
✔
Memory switch
✔
✔
R/E (Receipt Enhancement) settings
✔
✔
USB interface settings
✔
✔
Network interface settings
✔
✔
TM-Intelligent function settings
✔
✔
NV graphics
-
✔
NV bit image
-
✔
User defined page
-
✔
User NV memory
-
✔
