83
Appendix
Appendix
Product Specifications
Printing Specifications
dpi: dots per inch
1 The printing speed listed above are the values when using a new battery fully charged, the print density is 100%,
and at normal temperature (25°C). The printing speed changes automatically depending on the remaining battery,
the head temperature, and the number of print dots.
2 Programmable by commands.
3 Initial setting. Programmable by commands.
Printing method
Thermal line printing
Dot density
203 × 203 dpi
Printing direction
Unidirectional with friction feed
Maximum print speed *
1
100 mm/s {3.94"/s} (Standard mode)
40 mm/s {1.57"/s} (Fine mode) *
2
Printing width
48 mm {1.89"}, 384 dots
Characters per line
Font A
32
Font B
42
Font C
42
Font D
38
Font E
48
Kanji Font A
16
Special Font A
32
Special Font B
42
Character spacing
0.25 mm {0.01"} (2 dots)
Paper feed speed
80 mm/s {3.15"/s} (when feeding with the Feed button)
Line spacing *
3
3.75 mm {0.15"}
Summary of Contents for TM-P20
