Chapter 1 Product Overview
39
1
Paper Specifications
Cut sheet paper
Type
Normal paper (single-ply only)
Size (H
W)
60 to 120 mm {2.36 to 4.72 in}
120 to 235 mm {4.72 to 9.25 in}
Thickness
0.075 to 0.2 mm {0.003 to 0.008 in} (single-ply only)
Weight
60 to 120 g/m
2
{16 to 32 lb}
Make sure that the paper has no curl, folds (especially at the top edges), warps, or
wrinkles. Otherwise a paper jam may occur.
Since the paper sensors use a reflective photo sensor, do not use paper that has holes,
translucency, or areas whose reflection ratio is less than 40% in the area shown in the
figure below.
Do not insert paper that has clips, staples, or other objects. Doing so may cause a paper
jam, MICR reading error, or damage to the MICR head or scanner head.
The paper sensors ignore the range indicated in the figure below for the guide holes in
fan-folded paper.
55
m
m
20
mm
Diameter: 6 mm or less
