59
Appendix
Appendix
Product Specifications
*1: According to our operation conditions
Printing method
Thermal line printing
Paper feed speed
Approx. 200 mm/s {approx. 7.88"/s}
(continuous paper feeding with the Feed button)
Cutting Method
Partial cut (cutting with one point at center left uncut)
Interface
USB: USB 2.0 Full-speed (12 Mbps)
Ethernet: 10BASE-T/100BASE-TX
Serial: RS-232
Buffers
Receive buffer
4 KB/45 bytes (selectable using the memory switches)
Downloaded buffer
Approx. 12 KB
(both for user-defined characters and downloaded images)
NV graphics data
256 KB
Downloaded graphics data
208 KB
Barcode/two-dimensional symbol/
composite symbol printing
UPC-A, UPC-E, JAN 8 (EAN 8), JAN 13 (EAN 13), CODE 39,
ITF, CODABAR (NW-7), CODE 93, CODE 128, GS1-128,
GS1 DataBar Omnidirectional, GS1 DataBar Truncated,
GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional,
GS1 DataBar Limited, GS1 DataBar Expanded,
GS1 DataBar Expanded Stacked, PDF417, QR CODE,
MaxiCode, Composite Symbology
Drawer kick connector drive function
2 drives
Power supply
Rated voltage: 100 to 240VAC 50/60Hz, Rated current: 1.0 A
AC power consumption
(100 to 230 V/50 to 60 Hz)
*1
Operating
Approx. 28.7 W
Standby
Approx. 0.96 W
Life
*2
Mechanism
15 million lines
Thermal head
100 km
Autocutter
1,500,000 cuts
MTBF
*3
360,000 hours
MCBF
*4
60,000,000 lines
Temperature/humidity
Operating: 5 to 45°C {41 to 113°F}, 10 to 90% RH
Storage: -10 to 50°C {14 to 122°F}, 10 to 90% RH
Overall dimensions (H × W × D)
140 × 149 × 192 mm {5.51 × 5.87 × 7.56"}
Mass
Approx. 1.5 kg {3.31 lb} (roll paper excluded)
