WellPreint System User Manual
WellPrint
第
32
页
/
共
34
页
4.4.4Basic setting
Base step value
：
The default value is
360.
The value here is generally not modified, subject to the
software
Position offset
：
The X-Offset value is generally filled in here. When the margin width value is 0, it
will be just at the edge of the material. The Y-Offset value has the same meaning, but it is not used
in photo machine
Acceleration distance:
The distance from static to printing speed
acceleration, the greater the
value is, the more gentle the car. The smaller the value is, the faster the motor is reversed and the
faster the overall speed is. However, the motor is jitter, so an appropriate value needs to be
adjusted in practice. In
Y-Direction, the stepping distance is short each time, so the acceleration
distance is generally set to be small, between 3 and 8.
Color Offset:
The ink sequence of the channel corresponds to the flash ink sequence of the
head. When the ink sequence needs to be changed, it must be guaranteed that the two
channels of one color should be changed together, such as
CCMMYYKK, MMYYCCKK
, etc. Instead
of
KCMYMCK, the two adjacent channels should be one color
Note: When the parameters are modified, click the Apply button below to save it, otherwise,
it will not take effect
4.4System menu
In the system menu, the head status and vertical
calibration are the same as the software title menu
