Epson WF-5620 User Manual Download | Manualshive

Page: 321 / 329

background image

Parent topic:

General Product Safety Instructions

LCD Screen Safety Instructions

• Use only a dry, soft cloth to clean the LCD screen. Do not use liquid or chemical cleansers.

• If the LCD screen is damaged, contact Epson. If the liquid crystal solution gets on your hands, wash

them thoroughly with soap and water. If the liquid crystal solution gets into your eyes, flush them
immediately with water. If discomfort or vision problems remain after a thorough flushing, see a doctor
immediately.

• Do not press too hard on the LCD screen.

• Do not use a pointy or sharp object, such as a pen or your fingernail, to operate the LCD screen.

Parent topic:

General Product Safety Instructions

Wireless Connection Safety Instructions

To avoid adversely affecting the operation of the following equipment and causing an accident, do not
use the product:

• Near medical equipment in a medical facility.

• Within 8.7 inches (22 cm) of a cardiac pacemaker.

• Near automatically controlled devices, such as automatic doors or fire alarms.

Parent topic:

General Product Safety Instructions

Telephone Equipment Safety Instructions

When using telephone equipment, you should always follow basic safety precautions to reduce the risk
of fire, electric shock, and personal injury, including the following:

• Do not use the Epson product near water.

• Avoid using a telephone during an electrical storm. There may be a remote risk of electric shock from

lightning.

• Do not use a telephone to report a gas leak in the vicinity of the leak.

Caution:

To reduce the risk of fire, use only a No. 26 AWG or larger telecommunication line cord.

Parent topic:

General Product Safety Instructions

321

«
...
319
320
321
322
323
...
»

Summary of Contents for WF-5620










































































































































































































































































































































Reviews:

No comments

Related manuals for WF-5620

Brand: Fargo Pages: 6

Brand: Fargo Pages: 90

Brand: Fargo Pages: 126

Brand: FARGO electronics Pages: 278

Intelliprint cL160

Brand: Genicom Pages: 216

Brand: 3nStar Pages: 44

Brand: Xerox Pages: 4

Brand: Oki Pages: 72

imagePRESS V1000

Brand: Canon Pages: 123

ColorQube 9303 Series

Brand: Xerox Pages: 1812

Brand: THORLABS Pages: 31

Brand: Tysso Pages: 19

Secure Check Box

Brand: TypeHaus Pages: 2

Brand: Pyramid Innovation Pages: 71

Brand: Oneil Pages: 24

Brand: Oneil Pages: 22

Brand: Output Technology Pages: 67

WorkCentre 3045

Brand: Xerox Pages: 210

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands