Dial Mode:
Select the type of phone system to which you have connected the printer. When set to
Pulse
, you can
temporarily switch the dialing mode from pulse to tone by pressing ("T" is entered) while entering
numbers on the fax top screen. This setting may not be displayed depending on your region or
country.
Line Type:
Select the line type to which you have connected the printer.
When using the printer in an environment that uses extensions and requires an external access code,
such as 0 and 9, to get an outside line, select
PBX
. For an environment that uses a DSL modem or
terminal adapter, setting to
PBX
is also recommended.
Access Code
Select
Use
, and then register an external access code such as 0 or 9. Then, when sending a fax
to an outside fax number, enter # (hash) instead of the real code. # (hash) must also be used in
Contacts
as an external access code. If an external access code such as 0 or 9 is set in a contact,
you cannot send faxes to the contact. In this case, set
Access Code
to
Do Not Use
, otherwise
you must change the code in
Contacts
to #.
Header:
Enter your sender name and fax number. These appear as a header on outgoing faxes.
❏
Your Phone Number: You can enter up to 20 characters using 0-9 + or space. For Web Config, you
can enter up to 30 characters.
❏
Fax Header: You can register up to 21 sender names as necessary. You can enter up to 40 characters
for each sender name. For Web Config, enter the header in Unicode (UTF-8).
Receive Mode:
Select the receive mode. For details, see the related Information below.
DRD:
If you have subscribed to a distinctive ring service from your telephone company, select the ring
pattern to be used for incoming faxes. The distinctive ring service, offered by many telephone
companies (the service name differs by company), allows you to have several phone numbers on one
phone line. Each number is assigned different ring pattern. You can use one number for voice calls
and another for fax calls. Depending on the region, this option may be
On
or
Off
.
Rings to Answer:
Select the number of rings that must occur before the printer automatically receives a fax.
Remote Receive:
Remote Receive
When you answer an incoming fax call on a phone connected to the printer, you can start
receiving the fax by entering the code using the phone.
Start Code
Set the start code of
Remote Receive
. Enter two characters using 0-9, *, #.
>
>
362
Summary of Contents for WF-C878R Series
Page 20: ...Part Names and Functions Front 21 Rear 25 ...
Page 35: ...Loading Paper Paper Handling Precautions 36 Paper Size and Type Settings 37 Loading Paper 38 ...
Page 313: ...Using Optional Items List of Optional Items 314 Printer Stand 315 Paper Cassette Unit 322 ...
Page 532: ...Where to Get Help Technical Support Web Site 533 Contacting Epson Support 533 ...