Setting Up Fax Features
37
In Auto Answer mode, if the incoming call is a fax and you pick up the phone or
the answering machine answers, the WorkForce 520/525 Series automatically
begins receiving the fax. If the other party is a caller, the phone can be used as
normal or a message can be left on the answering machine.
Note:
Any phone or answering machine must be connected to the
EXT.
port to detect an
incoming fax call when a phone is picked up.
Setting Up Fax Features
Before sending or receiving faxes, you should create a fax header and select the
number of rings before the fax answers.
Note:
To select other settings or use the Epson FAX Utility, see the online
User’s Guide
.
Entering Fax Header Information
You should enter your name and phone number in the fax header before sending
faxes so that recipients can identify the origin of the fax.
Note:
If you leave the WorkForce 520/525 Series unplugged for a long period of time, the date
and time settings may get lost. See the
Start Here
sheet or online
User’s Guide
for
instructions on resetting them.
Entering Your Sender Name
1. Press the
K
Fax
button, then press
x
Menu
.
2. Press
u
or
d
to select
Fax Settings
, then
press
OK
.
3. Press
u
or
d
to select
Header
, then press
OK
.
4. Press
OK
to select
Fax Header
.
5. Use the numeric keypad to enter your sender name or other header
information (see “Using the Keypad to Enter Numbers and Characters” on
page 38). You can enter up to 40 digits.
6. When you’re done, press
OK
to return to the Fax Header screen.
Summary of Contents for WorkForce 520
Page 64: ...CPD 27904 Printed in XXXXXX ...
