Placing Originals on the Scanner
Loading Documents in the Automatic Document Feeder
Document Specifications
Loading Documents in the ADF
You can load your original documents in the ADF to scan multiple pages quickly.
Before loading documents in the ADF, see
to make sure your original documents can be loaded
in the ADF.
Document Specifications
The table below lists the sizes of paper you can load in the ADF. You can load up to 40 sheets (a stack thickness of 5.0
mm/0.2 inch or less) in the ADF.
Only load sheets that are all the same size in the ADF.
Paper size
Measurements
A4
210 × 297 mm (8.3 × 11.7 inches)
Letter
215.9 × 279.4 mm (8.5 × 11 inches)
Legal
215.9 × 355.6 mm (8.5 × 14 inches)
B5
182 × 257 mm (7.2 × 10.1 inches)
A5
148.5 × 210 mm (5.9 × 8.3 inches)
A6 (Portrait)
105 × 148.5 mm (4.1 × 5.9 inches)
Load only documents that meet the following specifications in the ADF.
Size
Width: 105 to 216 mm (4.1 to 8.5 inches)
Length: 148.5 to 356 mm (5.9 to 14 inches)
Weight
50 to 120 g/m
2
Paper type
High-quality paper, Bond paper, Check paper, Recycled paper
Make sure your documents meet the following conditions before loading them into the ADF.
The ink is dry.
The document has no holes and is not ripped or wrinkled.
The document has no staples, paper clips, or other objects attached to it; these may damage the feeder
mechanism.
The document has no folds.
The document has no cut-out areas.
The document is not a multi-part form or bound.
The document has no rear carbon coating.
See
for instructions on loading your documents in the ADF.
Summary of Contents for WorkForce GT-1500
