2.
Select
Setup
on the home screen, and then press the OK button.
3.
Select
Network Settings
, and then press the OK button.
4.
Select
Network Status
, and then press the OK button.
5.
Press the
l
or
r
button, then select
Print Status Sheet
using the
u
or
d
button.
6.
Press the
x
button.
The network status sheet is printed.
Replacing or Adding New Access Points
If the SSID changes due to the replacement of an access point, or an access point is added and a new network
environment is established, re-set the Wi-Fi settings.
Related Information
&
“Changing the Connection Method to a Computer” on page 34
Changing the Connection Method to a Computer
Using the installer and re-set up in a different connection method.
❏
Setting up from the website
Access the following website, and then enter the product name. Go to
Setup
, and then start setting up.
❏
Setting up using the software disc (only for the models that come with a software disc and users with computers
with disc drives.)
Insert the software disc into the computer, and then follow the on-screen instructions.
Selecting Change the Connection Methods
Follow the on-screen instructions until the following screen is displayed.
User's Guide
Network Settings
34