Adjusting CD/DVD Print Position - Windows
If your printed design is not positioned correctly on the disc, you can adjust the print position. First, load
an extra CD/DVD to use for printing test patterns.
1.
Open your file in Epson Print CD and click
.
You see this screen:
2.
Select
Print Position Confirmation Pattern
.
3.
Click
.
4.
Remove the disc after printing.
5.
Using a metric ruler, measure the distance from the hole to the cross marks labeled
Top
and
Right
.
Note:
Be sure to measure from the edge of the hole and not the edge of the printable area.
6.
Click
again, then select
Adjust Print Position
.
You see this screen:
195