6.
Select
Head Cleaning
, then press
OK
.
7.
Press the
start button to clean the print head. You see a message on the LCD screen during the
cleaning cycle.
Caution:
Never turn off the product during a cleaning cycle or you may damage it.
When the cleaning cycle is finished, you see a message on the display screen.
8.
Select
Print nozzle check pattern
, press
OK
, then press
start to run a nozzle check and confirm
that the print head is clean.
If you don’t see any improvement after cleaning the print head up to 2 times, turn off the product and wait
at least 6 hours. Then try cleaning the print head again. If quality still does not improve, one of the ink
cartridges may be old or damaged and needs to be replaced.
Parent topic:
Related tasks
Checking the Nozzles Using the Product Control Panel
Loading Paper in Cassette 2 (Lower Cassette)
Related topics
Cleaning the Print Head Using a Computer Utility
You can clean the print head using a utility on your Windows computer or Mac.
224