• Select a lower
Resolution
setting.
Parent topic:
Solving Scanned Image Quality Problems
Related topics
Scanned Image Colors Do Not Match Original Colors
Printed colors can never exactly match the colors on your computer monitor because printers and
monitors use different color systems: monitors use RGB (red, green, and blue) and printers typically use
CMYK (cyan, magenta, yellow, and black).
Check the color matching and color management capabilities of your computer, display adapter, and the
software you are using to see if they are affecting the palette of colors you see on your screen.
To adjust the colors in your scanned image, adjust these Epson Scan settings (if available) and try
scanning again:
• Change the
Image Type
setting and experiment with different combinations of the next settings.
• Adjust the
Tone Correction
setting.
• Adjust the
Auto Exposure
setting.
Parent topic:
Solving Scanned Image Quality Problems
Related topics
Scan Area is Not Adjustable in Thumbnail Preview
If you cannot adjust the scan area while viewing a Thumbnail preview in Epson Scan, try these solutions:
• Create a scan area by drawing a marquee on your preview image and adjusting it as necessary.
• Switch to Normal preview mode, if available, and preview your image again.
Parent topic:
Solving Scanned Image Quality Problems
Related concepts
Related tasks
Selecting a Scan Area - Office Mode
Selecting a Scan Area - Home Mode
Selecting a Scan Area - Professional Mode
268