290
LCD screen message
Condition/solution
Print Head Adjustment
Canceled. There is a
problem with the print
head. Contact Epson
Support.
If print quality has not improved after running a nozzle check and cleaning
the print head twice, turn off the product and wait at least 6 hours. Then run a
nozzle check and try cleaning the print head again. If print quality has still not
improved, run a Power Cleaning. If it still has not improved after that, contact
Epson for support.
Install the Epson Event
Manager software on
the computer to use this
feature. See your
documentation for more
details.
Make sure Epson Event Manager is installed on your computer.
Check the following if a
computer is not found.
- Connection between
the printer and the
computer (USB or
network)
- Installation of the
necessary software
- Power supply to the
computer
- Firewall and security
software settings
- Search again
See your documentation
for more details.
Make sure your product and computer are properly connected and all
necessary software is installed. Make sure the computer is turned on. You
may need to adjust the settings in your firewall or security software.
Downloaded from
Summary of Contents for XP-970 Series
