226
Caution:
After printing, handle the CD or DVD carefully. You may need to wait up to 24 hours for the ink
to dry fully before inserting it in a drive, depending on the type of disc you used. Keep printed discs away
from moisture and direct sunlight.
Parent topic:
Placing a CD/DVD on the Scanner Glass
You can place a CD or DVD on the scanner glass and copy the label design onto another CD or DVD.
1.
Open the document cover.
2.
Place your CD or DVD facedown in the center of the scanner glass.
3.
Close the document cover gently to keep your disc in place.
Parent topic:
Copying onto a CD/DVD
You can copy a printed photo or CD/DVD label directly onto an ink jet-printable CD or DVD. If you want,
you can first print a test design on plain paper.
1.
Load the CD, DVD, or plain paper you want to print on.
2.
Press the
home icon, if necessary.
3.
Select
Various Prints
.
4.
Select
Copy to CD/DVD
and select
OK
.
5.
Select Copy to CD/DVD and follow the instructions on the LCD screen to place your original CD,
DVD, or photo on the scanner glass and select
Proceed to set up Outer/Inner
.
6.
If necessary, adjust the inner and outer diameter of your CD as shown on the screen, and select
Select Type
.
Downloaded from
Summary of Contents for XP-970 Series
