(f) If your ZIP Drive is connected to a SCSI host adapter, make sure
the adapter is correctly installed in the computer. Refer to the
documentation that came with the adapter.
(g) Reinstall your ZIP Tools software.
(h) If the computer still doesn’t recognize the ZIP Drive, refer
to the README.TXT file or the electronic Installation Guide
included on your Install disk for additional problem solving
information.
4
Data transfer problems or erratic drive operation.
(a) Make sure the ZIP cable is correctly and completely connected
to both the ZIP Drive and the computer. (Tighten all connector
screws.)
(b) If an internal device is connected to the same adapter as
the ZIP Drive, remove the SCSI terminators from the adapter.
Refer to the documentation that came with the adapter.
5
Cannot write files to the ZIP Took disk.
If you are using the ZIP Drive on a Macintosh or a PC using
Windows/DOS, you must install ZIP Tools on your system before
you can write to the ZIP Tools disk. If you are using the ZIP Drive
on another SCSI system (such as Windows NT or UNIX), you must
perform a low-level (surface verify) format on the ZIP Tools disk
before you can use it on your system. (SCSI command 04h)
More Problem Solving Help
Refer to the README.TXT file or the electronic Installation Guide
included on your Install disk for additional problem solving
information. If your ZIP Drive still does not operate correctly
after checking the suggested solutions, refer to “Contacting
E
PSON
”
in this manual.
Warranty
This product carries a one year limited warranty. For complete
warranty information, refer to the detailed warranty statement
shipped with this product.
Note: When preparing your ZIP Drive for return to
E
PSON
for
repair, include the data cable and AC adapter. DO NOT include
your ZIP Tools and Driver diskettes.
19
