EPTA iarp CILY 50, Use And Maintenance

-12-

DEFROSTING AND TANK CLEANING

If, however, the layer of frost on tank walls exceeds 5 mm in thickness, you should completely defreeze 

the appliance as follows:

1.  Empty the appliance. 

2.  Unplug the unit.

3.  Leave the glass cover open and begin the operation of washing when the tank temperature is the 

same as the ambient temperature.

4.  Wash and dry the tank using a soft cloth and neutral soap.

5. 

Subsequentely, connect electrical plug  and after an hour of running with glass lid closed, the 

appliance is ready again to preserve your products. 

WARNING! Do not use water jets for cleaning: this can damage the 

electrical parts.

WARNING! Do not use mechanical appliances or other means to speed up 

the defrosting process, other than those recommended by the manufacturer.

For a good preservation of the cabinet’s body 

a periodical cleaning is necessary

.

EXTERNAL BODY

: When necessary, the external body should be cleaned with a cloth and a 

neutral 

soap

 and water solution.

STAINLESS STEEL SURFACES

: wash with warm water and mild detergent, rinse well and dry with 

soft cloth. 

Avoid scouring pads etc.

 which will spoil the finish of the stainless steel.

SURFACES IN PLASTIC MATERIAL

: wash with warm water and mild detergent, rinse well and 

dry with soft cloth; 

under no circumstances should alcohol, methylated spirits or solvents

 be used.

GLASS SURFACES

: only use 

products specifically designed for glass 

cleaning; It is not advisable 

to use ordinary water which can leave a film of calcium on the surface of the glass.

Each refrigerating appliance is provided with a thermostat  for automatic maintenance of the appropriate 

pre-established temperature inside the tank. 

This temperature adjuster is gauged by the factory and should not be touched by the user. 

Only if the average internal temperature is too cold or not cold enough should the knob turned.

Min

Max

Mid

TEMPERATURE SETTING