39/48
PREDISPOSITIONS OF THE MACHINE
E
2. SPIRALS ADJUSTMENT
The spirals can be adjusted to obtain better dispensing of
the product selections.
Proceed in the following way to adjust the spirals:
• Pull the spiral until releasing its coupling from the motor
seat;
• Turn the spiral by 45° at a time, until the required position
is reached;
• Release the spiral, the coupling will automatically go back
to its seat.
F.20
45°
F. 21
3. REPLACING THE SPIRALS
• In the standard version, spirals with different pitches are
supplied, suitable for the dispensing of products with
different shapes and consistency. Other spirals can be
ordered directly from the Manufacturer.
• All the spirals are interchangeable and can be mounted in
the vending machine trays in the following way:
- remove the tray from the vending machine and place it on
your work top
F. 22
- While holding the motor, turn the right-hand spiral
countclockwise, until it comes off its stop notch. Turn the
left-hand spirals clockwise.
- Replace the spiral with another one, more suitable for
the product to dispense: insert the new spiral into the
motor feeding flange by reversing the order of the above
operations.
- Adjust the spiral according to the instructions provided in
sec tion 2..
F. 23
If the spiral to replace is coupled to a bottle, can or
carton sliding guide, this should be lifted to release
its end from the tray edge before it can be removed.
If the sliding guide has not been removed, the spiral to
replace cannot be removed either.
