45/48
2. MASTER - SLAVE CONNECTION
•
Put the drawing (A) to the rear side of master machine (fig.32), on the drawing you will be
shown the point where you create a hole.
F.32
A
•
Create the hole
Ø
29mm (fig.33) and insert the cable ring (fig.34); pass the black wire con
-
nection (B).
F.33
F.34
•
Aprire la colonna comandi della macchina MASTER, remove the cover slave card and con-
nect the black cable block (B) in the terminal “J3” to the slave CPU (fig.35).
B
F.35
MAINTENANCE
G
