Modello - Modèle - Model
Modell - Modelo
DELIGHT LITE
DELIGHT PRIME
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
PAGE
15/68
N° DOC
UM000327
3. LOADING
Warning! It’s absolutely forbidden to place the product in the tanks over the max load level.
It is fundamental not to exceed the load limits indicated to avoid altering correct air circulation and thereby avoid
a higher product temperature.
4. TRANSPORTATION
The display cabinet is contained in a specially crated package that enables
transportation by the use of fork-lift trucks. Handle the machine on its own pallet
or on a similar platform; use a fork lift, either manual or electric, provided it is
adequate for handling such appliances and it has the requisite lifting capacity.
Handling is reserved to the authorised after-sales service.
The equipment MUST be kept vertical.
5. STORAGE AND DISMANTLING
WARNING! Use protective gloves during unpacking and
installation operations.
During unloading and movement operations, avoid tilting the machine and
avoid sudden manoeuvres. The unit is shipped anchored onto a wooden base
and protected by corner posts, cardboard top and nylon wrapping. Keep all
packaging away from children. For each subsequent handling of the cabinet, the
use of the wooden platform is recommended. Carefully remove the packaging,
taking care not to damage the components and not to throw away those that
will be needed for assembly.
ATTENTION! After unpacking, check that the appliance has not
suffered damage during transportation.
6. CHOICE OF THE INSTALLATION SITE
In selecting the place of installation, ensure that the following instructions are observed, this being vital for proper and
troublefree working of the cabinet:
• Do not install the cabinet in the vicinity of heating radiators or other heat sources.
• Do not install the cabint where it is exposed to direct sun light (e.g. through windows).
• Do not expose the refrigeration unit to air currents from fans, open doors, conditioning units.
• Keep the air intake and outlet area around the plinth area of the cabinet clear of cartons and other obstacles.
• It is necessary taht the condensing unit obtains a good circulation of air around it; also the area around the condensing
unit should not be obstructed by boxes or other objects; keep a distance from the wall of
10 cm
. at least.
CARDBOARD COVER
WOODEN BASE
POLYSTYRENE
CORNERS
Air-Condition
