Modello - Modèle - Model
Modell - Modelo
DELIGHT LITE
DELIGHT PRIME
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
PAGE
19/68
N° DOC
UM000327
16. DISPENSER WASH ASSEMBLY (Optional)
To assemble the dispenser wash, proceed as follows:
Screw in the dispenser wash support (
A
) with the dispenser
wash (
B
) using the screw (
C
) on the back of the equipment.
A
B
C
With water recirculation:
•
Fasten the water filling joint (
3
) with the incorporated valve,
positioned as in the illustration, to the tank (
2
) using the
fastening nut (
4
);
•
Connect the stainless steel “overflow” tube (
7
) to the
bushing (
6
) and fasten it to the tank with the nut (
5
);
•
Connect the water filling joint (
3
) to the rubber tube to a
tap and fill the tank (
2
) of clean water;
• Connect the rubber tube to the bushing (
6
) and drain the
excess water or dirt (filtered from the cover/partition (
8
))
into a sink.
Without water recirculation:
•
Fasten the water filling joint (
3
) with the valve, positioned
as in the illustration, to the tank (
2
) using the fastening nut
(
4
);
•
Connect the stainless steel “overflow” tube (
7
) to the
bushing (
6
) and fasten it to the tank with the nut (
5
);
• Connect the rubber tube to the bushing (
6
) and drain the
excess water or dirt (filtered from the cover/partition (
8
))
into a sink.
•
Manually fill the tank with clean water.
![FRIGOGLASS Retro [R290] LC User Manual preview](http://thumbs.mh-extra.com/thumbs/frigoglass/retro-r290-lc/retro-r290-lc_user-manual_2338098-001.webp)
