-10-
TEMPERATURE SETTING
Each refrigerating appliance is provided with a thermostat for automatic maintenance of the appropriate
pre-established temperature inside the tank.
This temperature adjuster is gauged by the factory and should not be touched by the user.
Only if the average internal temperature is too cold or not cold enough should the knob
(1)
turned.
The numbers on the regulation plate are not related to temperature values but only to knob reference
position: a higher number corresponds to a lower temperature.
CONTROLS
1) Thermostat
2) Light switch
3
2
4
1
5
0
1
BACK SIDE OF
REFRIGERATOR
3
2
4
1
5
0
0
1
2
MALFUNCTIONS AND REMEDIES
Most of the inconveniences are generally due to defective electrical connections.
These problems can usually be solved on the place.
The unit does not start
:
-check that there is voltage at the wall socket;
-check that the unit is properly plugged.
The internal temperature is not cold enough
:
-check that the unit is not placed too close to any heating source;
-check the temperature setting;
-check that around the cabinet air can properly circulate;
-check the perfect closing of the doors
The unit is noisy
:
-check that all the bolts and nuts are properly fasten;
-check that the unit is placed on an even surface.
INFORMATIONS ABOUT SERVICE
