Modello - Modèle - Model
Modell - Modelo
GLOBO 700.3 NG
GLOBO 480.3 NG
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
PAGE
19/68
N° DOC
UM000406
4.
TRANSPORTATION
The cabinet is contained in a specially crated package that enables transportation by the use
of fork-lift trucks.
For each subsequent handling of the cabinet, the use of the wooden platform is recommended.
The unit is shipped anchored onto a wooden base and protected by corner posts, cardboard
top and nylon wrapping.
It must only be handled using a fork lift truck with adequate power to the load.
Positioning the appliance horizontally or on its side or upside down is to be strictly avoided.
Handling is reserved to the authorised after-sales service.
The equipment MUST be kept vertical.
5.
STORAGE AND DISMANTLING
WARNING! Use protective gloves during
unpacking and installation operations.
During unloading and movement operations, avoid tilting
the machine and avoid sudden manoeuvres.
Keep all packaging away from children. For each subsequent
handling of the cabinet, the use of the wooden platform is
recommended. Carefully remove the packaging, taking care
not to damage the components and not to throw away those
that will be needed for assembly.
Keep all packaging away from children.
ATTENTION! After unpacking, check that the
appliance has not suffered damage during
transportation.
6.
CHOICE OF THE INSTALLATION SITE
In selecting the place of installation, ensure that the following instructions are observed, this
being vital for proper and troublefree working of the cabinet:
•
Do not install the cabinet in the vicinity of heating radiators or other heat sources.
•
Do not install the cabint where it is exposed to direct sun light (e.g. through windows).
•
Do not expose the refrigeration unit to air currents from fans, open doors, conditioning units.
•
Keep the air intake and outlet area around the plinth area of the cabinet clear of cartons
and other obstacles.
•
It is necessary taht the condensing unit obtains a good circulation of air around it; also
the area around the condensing unit should not be obstructed by boxes or other objects;
keep a distance from the wall of
10 cm
. at least.
Air-Condi�on
POLYSTYRENE
CARDBOARD
