-7-
INSTALLATION
Take out packing and clean all the cabinet using warm water together with 5% of neutral soap then
dry it with a soft-cloth; for the glass parts only use specific products, avoiding the use of water which
can leave on the glasses limestone residues.
Warning!
Do not install the unit in open places and do not
expose it to rain.
Cabinet must be installed on a perfectly even surface,
far away from any heat source including sun rays.
Take care that the lower grids installed on the sides of
the counter are free and not obstructed by oxes or any
other obstacle
Good running of the cabinet can be compromised in
cases where the airflow is disturbed.
Install and position the unit in such a way so as to
allow easy access to the power socket.
Never use electrical equipment in the refrigerated
compartment
Never place containers of liquid on or immediately
above the ticket counter; should the content spill out,
it would damage the counter.
THE REFRIGERATOR IS NOT SUITABLE FOR WORKING IN DANGEROUS
ENVIRONMENT WITH RISK OF FIRE, EXPLOSIONS OR RADIATIONS.
Operation is regular with ambient temperature indicated on
technical data plate.
PUTTING INTO OPERATION
Check that the voltage on the identification plate is
the same as that of the network.
THE ELECTRICAL SUPPLY LINE TO WHICH
THE REFRIGERATOR WILL HAVE TO BE
CONNECTED IS TO BE PROTECTED BY A
VERY SENSITIVE DIFFERENTIAL SWITCH
(Rc=16A,Dc=30mA); IT IS ALSO TO BE LINKED
TO THE GENERAL EARTHING PLANT.
The manufacturer disclaims all responsability for
any damage to people or
things due to incorrect
observance of this rule.
Earthing is necessary and compulsory by law.
Absolutely never use reduction units, patch cords,
adapters or multiple socket outlets to connect the
counter.
DIRECTLY connect the equipment to the mains.
Summary of Contents for iarp JAZZ M
Page 23: ...23 Gross Vol 163 dm Net Vol 65 dm...
Page 24: ...24...
