-8-
INSTALLATION
Take out packaging and clean all the cabinet using warm water
together with 5% of neutral soap then dry it with a soft cloth;
for the glass parts only use specific products, avoiding the use
of water which can leave on the glasses limestone residues.
Warning!
Keep a distance from the wall of
10 cm. at least.
Cabinet must be installed on a perfectly even surface
(please settle the adjustable feet), far away from any heat
source (radiators, stoves, etc) including sun rays.
Good running of the cabinet can be compromised in
cases where the airflow is disturbed (wind, ventilators,
air conditioning outlets, etc).
Smooth running of the cabinet is assisted when sufficient
air is permitted to flow through the bottom of the unit; it is
very important that the grills at the base are kept uncovered.
Do not expose the cabinet to rain.
Warning!
Install and position the unit in such a way so as to allow
easy access to the power socket.
Never use electrical equipment in the refrigerated
compartment
Never place containers of liquid on or immediately above
the ticket counter; should the content spill out, it would
damage the counter.
Insert between glass door and motor space the
wood part to avoid door frame foldings during
transport.
Reinsert it when the cabinet is removed.
110°
WARNING!!
To prevent damaging the mechanism do not
exceed the maximum angle of door opening.
THE REFRIGERATOR IS NOT SUITABLE FOR WORKING IN DANGEROUS
ENVIRONMENT WITH RISK OF FIRE, EXPLOSIONS OR RADIATIONS.
Operation is regular with ambient temperature indicated on
technical data plate
(in the tank).
