-14-
INSTALLATION
Take out packaging and clean all the cabinet using warm water together
with 5% of neutral soap then dry it with a soft cloth; for the glass parts
only use specific products, avoiding the use of water which can leave on
the glasses limestone residues.
•
Keep a distance from the wall of
10 cm. at least.
•
Cabinet must be installed on a perfectly even surface (please settle
the adjustable feet), far away from any heat source (radiators, stoves,
etc) including sun rays.
•
Good running of the cabinet can be compromised in cases where the
airflow is disturbed (wind, ventilators, air conditioning outlets, etc).
•
Smooth running of the cabinet is assisted when sufficient air is
permitted to flow through the bottom of the unit; it is very important
that the grills at the base are kept uncovered.
•
Do not expose the cabinet to rain.
•
Install and position the unit in such a way so as to allow easy access to the power socket.
•
Never use electrical equipment in the refrigerated compartment
•
Never place containers of liquid on or immediately above the ticket counter; should the
content spill out, it would damage the counter.
Regolare i piedini anteriori più bassi
di 10 mm rispetto al piano di appoggio
dei rullini (se presenti) o al piano di
appoggio dei piedini posteriori.
THE REFRIGERATOR IS NOT SUITABLE FOR WORKING IN DANGEROUS
ENVIRONMENT WITH RISK OF FIRE, EXPLOSIONS OR RADIATIONS.
Operation is regular with ambient temperature indicated on
technical data plate
(in the tank).
CLIMATE CLASS
ENVIRONMENT OPERATING TEMPERATURE
0
20
1
16
2
22
3
25
4
30
6
27
5
40
7
35
8
23,9
Summary of Contents for iarp SUN 42.3
Page 2: ... 2 ...
Page 44: ... 44 ...
