061715-JA
Installation
1.
Locate your desired installation location with a stud finder (recommended) and mark the
where the screen is to be installed
2.
Drill a hole with the proper bit size according to the wood screw
3.
Line up the wall brackets with the drilled holes on the installation location and screw them
Phillips screwdriver.
Note: Use 2 top wall brackets on diagonal sizes
sizes 135” and above.
4.
Position the fixed frame screen onto the top wall brackets as shown in
center of the bottom frame to secure the installat
5.
The design of the wall brackets allow
feature of the installation design as it allows
6.
Using both hands finish the installation by pushing the lower portion of the fixed frame screen into the
lower bracket as shown in
Fig. 19
CAUTION
Please follow these instructions carefully to ensure proper maintenance and
1. When hanging the screen up, please make sure that no other objects such as power switches, outlets, furniture,
ladders, windows, etc. occupy the space de
2. Regardless if the screen is hung on or installed into the wall, make sure that the proper mounting anchors are
used and that the weight is supported appropriately by a strong and structurally sound surface just as any large
and heavy picture frame should.
(Please consult a home improvement specialist for the best advice on installation)
3. Frame parts are made of high quality velour
4. When not in use, cover over the screen with a furniture sheet to pro
impurities.
5. When cleaning, use a damp soft cloth with warm water to remove any marks on the frame or screen surface.
6. Never attempt to use any solutions, chemicals or abrasive cleaners on the screen surfac
7. In order to avoid damaging the screen, avoid touching it directly with your fingers, tools or any other sharp or
abrasive objects.
8. Spare Parts should be placed out of reach of small children
For a local Elite Prime Vision
www.EPVscreens.com
(Fig. 18)
www.EPVscreens.com
Locate your desired installation location with a stud finder (recommended) and mark the
is to be installed.
with the proper bit size according to the wood screws included.
with the drilled holes on the installation location and screw them
wall brackets on diagonal sizes below 135”, and use 3 top wall brackets on diagonal
Position the fixed frame screen onto the top wall brackets as shown in
Fig. 18
and push down at the
to secure the installation.
wall brackets allows the frame to slide over them through its sides.
as it allows your screen to be properly centered.
Using both hands finish the installation by pushing the lower portion of the fixed frame screen into the
9
.
Please follow these instructions carefully to ensure proper maintenance and safety of your
1. When hanging the screen up, please make sure that no other objects such as power switches, outlets, furniture,
ladders, windows, etc. occupy the space designated for your Fixed-Frame screen.
2. Regardless if the screen is hung on or installed into the wall, make sure that the proper mounting anchors are
used and that the weight is supported appropriately by a strong and structurally sound surface just as any large
specialist for the best advice on installation)
3. Frame parts are made of high quality velour-surfaced aluminum and should be handled with care.
4. When not in use, cover over the screen with a furniture sheet to protect it from dirt, grime, paint or any other
5. When cleaning, use a damp soft cloth with warm water to remove any marks on the frame or screen surface.
6. Never attempt to use any solutions, chemicals or abrasive cleaners on the screen surface.
7. In order to avoid damaging the screen, avoid touching it directly with your fingers, tools or any other sharp or
ut of reach of small children in accordance with household safety guidelines.
Prime Vision contact or Technical Support, please visit
www.EPVscreens.com
(Fig.19)
7
Locate your desired installation location with a stud finder (recommended) and mark the drill-hole area of
with the drilled holes on the installation location and screw them in using a
wall brackets on diagonal
and push down at the
over them through its sides. This is an important
Using both hands finish the installation by pushing the lower portion of the fixed frame screen into the
your Screen.
1. When hanging the screen up, please make sure that no other objects such as power switches, outlets, furniture,
2. Regardless if the screen is hung on or installed into the wall, make sure that the proper mounting anchors are
used and that the weight is supported appropriately by a strong and structurally sound surface just as any large
surfaced aluminum and should be handled with care.
tect it from dirt, grime, paint or any other
5. When cleaning, use a damp soft cloth with warm water to remove any marks on the frame or screen surface.
7. In order to avoid damaging the screen, avoid touching it directly with your fingers, tools or any other sharp or
in accordance with household safety guidelines.
contact or Technical Support, please visit
