Configuring Leviton OmniTouch 7 Touchscreens & Helios 2N door stations with the Epygi
QX IP PBX
Revision 1.0 13
31-Mar-16
Configure the SIP settings to make and receive calls
1.
Click on
Services
(purple icon) and then select Phone.
2.
Enter the following:
•
Display Name – recommend using the name assigned to the extension created in the Epygi.
•
Phone Number (ID) – this is the SIP Registration Username assigned to the door station in the Epygi IP Line Settings.
•
Domain – enter in the network domain.
•
Expand the Authentication tab and enable Use Authentication Id
•
Authentication Id: this is the SIP Registration Username assigned to the door station in the Epygi IP Line Settings.
•
Password: this is the SIP Registration Password assigned to the door station in the Epygi IP Line Settings.
•
Check the box for Registration enabled.
•
Registrar Address – this is the IP address for the Epygi.
•
Registrar Port – you can use the default value (5060).
•
Registration Expires – Recommend to set to 3600 s (1 hour).
•
Click on Apply.
•
Click on the Video tab and ensure that Codec 1 is set to H.264.
•
Click on Apply.
