Epygi Technologies
Using Quadro Features on IP Phones
7.6
Polycom SoundPoint IP300
7.6.1
Limitations Specific to Polycom SoundPoint IP300
There are no additional limitations except for those mentioned in
.
7.6.2
Features Codes on Polycom SoundPoint IP300
This section presents the feature codes for PBX Services accessible during a call specific to
Polycom SoundPoint IP300 and serves as a supplement to
Quadro Feature Codes on IP Phones
.
PBX Services accessible during a call
Soft Keys
Call Hold
Hold
(the key is also possible)
Call Waiting
Hold
Call Blind Transfer
More
Æ
Trnsfr
Æ
Blnd
Call Transfer with Consultation
More
Æ
Trnsfr
Æ
Dial
Æ
Trnsfr
Call Conference
More
Æ
Conf
Æ
Dial
Æ
Conf
7.6.2.1
To Put a Call on Hold
During a call, press either the key Hold on the keypad or the soft key Hold. To resume the held
call, press Resume.
7.6.2.2
To Accept a Second Incoming Call
Put a call in progress on hold (see above).
Use the arrow keys on the keypad to receive a second call.
Press Answer to receive the call or Reject to reject it.
7.6.2.3
To Blind Transfer a Call
During a call, press the soft key More, then Trnsfr. This puts the call in progress on hold.
Press Blind to get a dial tone.
Dial the phone number to which the call on hold is to be transferred to and press Dial. You will be
disconnected automatically from both calls.
7.6.2.4
To Transfer a Call with Consultation
During a call, press the soft key More, then Trnsfr. This puts the call in progress on hold.
Dial the phone number to which the call on hold is to be transferred to and press Dial. Consult the
called party, i.e. to announce the call.
Press Trnsfr again to transfer the call on hold to the called number. You will be automatically
disconnected from both calls.
PAGE 24 29-Mai-
2006