Epygi Technologies
Using Quadro Features on IP Phones
7.11
Aastra 9133i
7.11.1
Limitations Specific to Aastra9133i
There are no additional limitations except for those mentioned in
.
7.11.2
Feature Codes on Aastra9133i
This section presents the feature codes for PBX Services accessible during a call specific to
Aatra9133i and serves as a supplement to
Quadro Feature Codes on IP Phones
Please Note:
If the Aastra9133i phone is connected to the Quadro locally, i.e. the phone is
configured as a Quadro’s local IP extension using the auto-configuration, then almost all PBX
services described in the Feature Codes for SIP Phones section can be accessed by using
corresponding programmable keys.
PBX Services
Keys / Soft Keys
Call Hold
Hold
Call Waiting
Line keys
Call Blind Transfer
Xfer
Æ
dial the number
Æ
Xfer
Call Transfer with Consultation
Xfer
Æ
dial the number
Æ
“ Dial”
Æ
consult
Æ
Xfer
Call Conference
Conf
Æ
dial the number
Æ
“Dial”
Æ
Conf
7.11.2.1
To Put a Call on Hold
To put a call in progress on hold, press the Hold key on the phone keypad. The LED of the
corresponding line key starts blinking, indicating that you have a call on hold.
To resume the call on hold, press the Line Key with a blinking LED.
While a call is on hold you can make a second call by pressing the key of a free line. This provides a
dial tone on that line enabling you to make a second call.
Please Note:
You can put a call on hold and switch directly to another line by pressing a free line
key during a call.
7.11.2.2
To Accept a Second Incoming Call
To accept a second call when you are in a call, press the line key with a flickering LED (example, L1
is in call, L2 is blinking, press Line Key L2). Accepting a second call puts the call in progress on hold.
To switch between the calls, press line keys and put the current one on hold.
7.11.2.3
To Blind Transfer a Call
Press the Xfer key during a call to be transferred. This puts the call in progress on hold and provides
a dial tone on a free line available.
Dial the number to which the call is to be transferred and press the key Xfer again. The party on
hold is transferred to the called party.
PAGE 34 29 May 2006