Epygi Technologies
Using Quadro Features on IP Phones
7.16
AT-320 SIP Phone
7.16.1
Limitations Specific to AT-320 SIP Phone
AT-320 SIP Phone does not support the Call Conferencing feature.
See also
7.16.2
Feature Codes on AT-320 SIP Phone
This section presents the feature codes for PBX Services accessible during a call specific to AT-
320 SIP Phone and serves as a supplement to
Quadro Feature Codes on IP Phones
PBX Services accessible during a call
Keys / Soft Keys
Call Hold
Hold
Call Waiting
Hold
Call Blind Transfer
Hold
Æ
number
Æ
FWD
Call Transfer with Consultation
Hold
Æ
number
Æ
r
Æ
FWD
7.16.2.1
To Put a Call on Hold
During a call, press the Hold key. To resume a call on hold, press the Hold key again.
While a call is on hold, you can make a second call. Dial the phone number you wish to call and
press
r
.
If the phone is connected to two calls, one is in progress and the other is on hold, use the Hold key
to switch between those calls.
7.16.2.2
To Accept a Second Call
During a call, press the Hold key. This puts the call in progress on hold and receives an incoming
call.
7.16.2.3
To Blind Transfer a Call
During a call, press the Hold key to put the call in progress on hold.
Dial the phone number the held call is to be transferred and press the FWD key.
Hang up the phone. The call on hold will be transferred to the called party.
7.16.2.4
To Transfer a Call with Consultation
During a call, press the Hold key to put the call in progress on hold.
Dial the phone number the held call is to be transferred and press the
r
key.
Consult the called party, for example, announcing the call.
Press the FWD key to transfer the held call to the called destination.
PAGE 42 29 May 2006