Epygi Quadro16x Manual Download | Manualshive

Page: 8 / 44

background image

Epygi Technologies

Using Quadro Features on IP Phones

6.2.1

To Use Busy Autoredial

Service is functional for SIP and PBX calls only. For PSTN calls, feature works as a single redial (with no multiple

attempts to reach the called destination).

Dial

b

to redial the last number that you called.

If the called number is busy, after dialing

b

, stay with the handset lifted to activate the

automatic redialing of the last called number for the time period specified on the Autoredial
Settings page (User login

Æ

Call Handling

Æ

Autoredial).

The autoredial terminates as soon as

1.

The called number is idle and you hear ring back tones,

2.

The specified Autoredial Period has expired.

A beep sound will be heard if no autoredialing is possible.

6.2.2

To Call Back

Dial

c

. The system will call back the last caller.

"The dialed number doesn't exist" voice message will be played if no call back is possible.

6.2.3

To Activate Forwarding Service

Dial

e

and hang up. The Unconditional Call Forwarding service with the settings specified for Any

Address/Other Addresses on the Caller ID Based Services page will get activated (User login

Æ

Supplementary Services).
Use the same key combination to deactivate the service.
The feature code will have no effect if no unconditional forwarding is configured for Any
Address/Other Addresses. Instead, the system will ask to configure the forwarding settings first.

6.2.4

To Switch Do Not Disturb Mode

Dial

hc

and hang up. Your phone bell will be off during the period indicated on the Do Not

Disturb Settings page (User login

Æ

Call Handling) and all incoming calls will be directly forwarded

to your voice mail (if the voice mail service is activated).
Use the same key combination to deactivate the DND service.

6.2.5

To Block Last Caller

Dial

hd

. The last caller will be blocked and a corresponding entry will be added to the Caller ID

Based Services (User login

Æ

Supplementary Services) page.

Attention:

This service can be activated within 10 seconds after call termination. To unblock the

blocked party, go to the Caller ID Based Services page and disable the Incoming Call Blocking

service for the blocked address. If no other services are enabled for the address, you may delete the
entry from the table.
Blocking the caller with anonymous caller ID (like anonymous@anonymous or similar) will lead to
blocking all callers with unknown caller address.

PAGE 8 29 May 2006

«
...
6
7
8
9
10
...
»

Summary of Contents for Quadro16x













































Reviews:

No comments

Related manuals for Quadro16x

Brand: Yeastar Technology Pages: 14

Brand: Icom Pages: 2

Brand: Icom Pages: 160

Brand: CloudGate Pages: 25

Brand: T-Mobile Pages: 25

Brand: NETGEAR Pages: 53

Brand: Valcom Pages: 4

Brand: EAE Pages: 22

Brand: LANSITEC Pages: 25

Brand: Gree Pages: 31

Brand: Sharp Pages: 16

Brand: Mercury Pages: 5

Brand: Radio-tone Pages: 12

Brand: R9 Technology Pages: 5

Brand: Wireless Devices Pages: 32

Brand: ZyXEL Communications Pages: 2

Brand: Datalogic Pages: 2

Brand: NCM Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands