Reviewed QUIG by Thomas/Isolde
Step 2.2: Basic Configuration
WAN Interface Configuration
If your ISP requires a specific MAC address, (for example, for authentication), it can be en-
tered on this page. The required MAC address can be entered into the User defined field.
If a specific MAC address is not required, leave the default selection This device selected.
Fig. I-19: WAN Interface Configuration page
Use the MTU drop down list to select the maximum packet size on the Ethernet (in bytes).
Click Next to display the DNS Settings page.
DNS Settings
For DNS, the selection is set to Dynamically by Provider. When using a static IP address,
fixed values must be entered.
Fig. I-20: DNS Settings page
QuadroCS (SW Version 3.1.x)
22
Summary of Contents for QuadroCS SW-Version
Page 1: ......