Quadro Manual I: Installation Guide
About This Installation Guide
About This Installation Guide
This Installation Guide explains the installation and basic configuration of the QuadroCS
Conference Server. It gives step-by-step instructions to connect the device properly to the
Internet and to attach a PC for administration and configuration. It also describes the basic
configuration of a conference.
Step 1: Installing the QuadroCS
explains connection of cables and devices to the
QuadroCS.
Step 2: Configuring the QuadroCS
describes the configuration steps necessary to inte-
grate the QuadroCS into your network environment.
Please Note:
The QuadroCS configuration described in this Installation Guide ex-
plains basic networking configurations. For more complex network environments,
please refer to the QuadroCS Administrator's Manual.
Step 3: Registering on Epygi’s Technical Support
Before a QuadroCS conference can be registered on the Epygi SIP server, you must
be registered with Epygi Technical Support. This section shows you how to gain ac-
cess to the Epygi Technical Support Center and the Epygi SIP Server. If no SIP reg-
istration is needed, skip to Step 5.
Step 4: Registering a Conference on Epygi’s SIP Server
explains how to register a SIP
conference.
Step 5: Configuring a Conference on the QuadroCS
describes how a conference is set
up on the QuadroCS
Appendix: PC DHCP Settings
explains how to configure your PC to access the
QuadroCS configuration GUI.
Appendix: Changing the Admin Password
explains how to change the default administra-
tor password.
QuadroCS (SW Version 3.1.x)
5
Summary of Contents for QuadroCS SW-Version
Page 1: ......