QuadroFXO Manual II: Administrator's Guide
Quadro's Graphical Interface
QuadroFXO; SW Version 5.1.x
10
The WAN IP Configuration page is only displayed if Ethernet or
PPTP has been selected to be the uplink protocol. It offers the
following components:
The Assign automatically via DHCP radio-button selection switches
to automatic retrieval of the WAN IP address from a DHCP server at
the ISP/uplink.
Please Note:
DHCP referred to here is the one that runs on the
provider’s side and not the Quadro’s personal DHCP server.
The Assign Manually radio-button switches to the manual
adjustment of IP settings. This selection requests the following
parameters:
IP Address requires the IP address for the Quadro WAN interface.
Subnet Mask requires the subnet mask for the Quadro device WAN
interface.
Default Gateway requires the IP address of the router where all
packets are to be sent to, for example, to the router of the provider.
Fig. II-8: Internet Configuration Wizard - WAN IP Configuration page
The WAN Interface Configuration page may be used to modify the
MAC address of the Quadro. This might be necessary if the ISP
(Internet Service Provider) requires a specified MAC address, for
example, for authentication. This page offers the following
components:
MAC Address Assignment manipulation radio-buttons:
•
This Device turns to the default MAC address of the Quadro.
•
User Defined requires user defined MAC Address.
The MTU drop down list allows you to select the maximum packet
size on the Ethernet (in bytes). MTU is used to fragment the packets
before transmitting them to the network. The MTU preferred value is
dependent on the Ethernet connection . The default MTU size is 1500
Bytes for Ethernet and 1400 Bytes for PPPoE.
Fig. II-9: Internet Configuration Wizard - WAN MAC Address Configuration page
Status
The system status window displays non-editable tables providing extensive system status information about Quadro:
,
and
. The links on this page lead to device Transfer Statistics, user
mailboxes and supplementary services configuration pages.
The System Status page has several tables providing system information.
General Information
The General Information page includes the following information:
•
Uptime duration - Period Quadro is on since last reboot.
•
Device hostname - Quadro device host name.
•
Quadro Operating System - Quadro operating system
version.
•
Application Software - Software and file system versions of
the Quadro.
•
Boot Loader - Quadro boot loader version.
•
DSP Software - Quadro DSP software version and the date of
build.
•
Language Pack – this field is present only when the custom
language pack is uploaded and it indicates the version.
Fig. II-10: Quadro Status - General Information page
