QuadroFXO Manual II: Administrator's Guide
Quadro's Graphical Interface
QuadroFXO; SW Version 5.1.x
12
The area Receive Values provides the following:
•
Receive Bytes - number of received bytes.
•
Receive Packets - number of received Ethernet packets.
•
Receive Errors - number of received packets containing
errors.
•
Receive Drop Errors - number of received packets that
have been discarded.
•
Receive Overrun Errors - number of received overrun
errors that occur when the receive buffer is not large
enough to hold all incoming packets. This error usually
appears due to a slow receiving system.
•
Receive MultiCast Packets - number of received
broadcast packets.
The area Transmit Values provides the following:
•
Transmit Bytes - number of transmitted bytes
•
Transmit Packets - number of transmitted Ethernet
packets.
•
Transmit Errors - number of transmitted packets
containing errors.
•
Transmit Drop Errors - number of transmitted packets that
have been discarded.
•
Transmit Carrier Errors - number of transmit carrier errors
that occur due to a defective or lost connection on the
Ethernet link.
•
Transmit Collisions - number of transfer errors that
occurred during a simultaneous packet transmission from
both sides.
Fig. II-13: Transfer Statistics Diagram Chart
To see the Transfer Statistics Diagram Charts, select the desired criteria and click Save to generate the corresponding chart and the table
showing the transfer statistics values (if enabled). The letters M (millions) and K (thousands) used in the legend of the displayed diagrams show the
total number of specified criteria. The Reset Statistics button is used to reset the chart and the table (if enabled).
Lines Status
The Quadro Status - Lines Status page shows the current status of each FXO line with all details of the active calls. Since only one line of
information can be displayed at a time, the FXO# functional buttons are used to navigate through information regarding other lines.
The Lines Status table of each FXO Line provides information about
the Allowed Call Types, the extension number (attendant or routing
client), to whom the Incoming Call is Routed To and the State of the
line (Free or Busy).
The FXO Channel Usage Statistics link is only present for local FXO
lines (this option is not available for shared FXO lines) and leads to the
page where diagram chart of FXO lines usage can be viewed.
Fig. II-14: Line Status - FXO Status page
