QuadroFXO Manual II: Administrator's Guide
Quadro's Graphical Interface
QuadroFXO; SW Version 5.1.x
21
To Assign an Action to the Event
1.
Select the checkbox of one or more events to assign an action to them.
2.
Press
the
Edit button. The Edit Event Settings page appears.
3.
Select an action type from the Action radio buttons to notify the administrator about the event.
4.
Press
the
Save button to submit the changes or use Back to abort the selected action.
Time/Date Settings
The Time and Date Settings page provides information about the current system time and date. The settings may be updated through the
international time and date servers.
Time is used to set the local time (hour, minute).
Date is used to set the date (month, day, year).
Timezone provides a selection of world time zones and is used to select the local country time zone.
Enable Simple Network Time Protocol Server enables the SNTP (Simple Network Time Protocol) server on Quadro, thus Quadro becomes the
timeserver for its LAN.
Enable Simple Network Time Protocol Client enables the
SNTP client on the Quadro, thus Quadro becomes a client to an
external timeserver. A checkbox disables Date and Time drop
down lists and enables the following parameters:
The SNTP Servers table lists all defined NTP Servers.
The Add functional button opens an Add NTP Server page
where a new NTP server can be defined. This page offers the
NTP Server radio buttons that are used to choose between a
manual and a predefined NTP server.
Manual requires the NTP server’s FQDN (Full Qualified
Domain Name) or its IP address.
Predefined is used to select the NTP server’s host
address from the drop down list, where the most common
NTP servers are listed.
The Move Up and Move Down functional buttons are used to
sort NTP servers in the order they need to be accessed. If the
NTP server in the first position of the SNTP Servers table does
not answer, NTP server in the next position will try to be
reached.
Please Note:
You can add another NTP server to the list if the
defined NTP servers are not functional (for example, Quadro's
date/time is not being updated automatically).
Polling Interval indicates the time interval for the periodical
synchronization between the timeserver and Quadro. It counts
in hours.
Attention:
Time and Date Settings will be reset if Quadro has
lost power.
Fig. II-34: Time and Date Settings page
Fig. II-35: Add NTP Server page
Mail Settings
The System Mail Settings page allows you to send warnings automatically about the board status or problems to the administrator.
System events
that require email notification are selected on the
page. System mail must be enabled and the SMTP server needs to be configured for voice
message transmission to the extension user’s mailing account.
Enable enables system mail sending and voice messages transmission to the extension user’s mailbox.
SMTP Host requires the SMTP host IP address or domain name. The SMTP host needs to be configured to enable voice message transmission.
SMTP Port requires the SMTP host port number.
