QuadroFXO Manual II: Administrator's Guide
Quadro's Graphical Interface
QuadroFXO; SW Version 5.1.x
29
In the View System Logs page you may view the generated logs
on the Quadro. System logs are useful to determine any king of
problems on the Quadro as well as to monitor the user’s access
and the usage of it.
On the left side of the page, a list of main logs is displayed.
Clicking on the needed link will display the log on the right side of
the page.
The text field on the left side is dedicated for support personnel
only and is used to search a custom log not listed on this page. To
do so, insert a required log name to the text field and press Show
Custom Log functional button.
Fig. II-51: System Logs – View System Logs page
Automatic Provisioning
Automatic Provisioning provides the possibility to automatically
configure the WAN network settings of Quadro. This is very useful
when the administrator is not actually aware about the Quadro’s
network settings. Automatic Provisioning automatically detects
the matching network configuration settings, applies them on the
Quadro, thus connecting the device to the internet through the
available ISP connection.
Please Note:
Automatic Provisioning can only be run from the
LAN side of the Quadro, i.e. from the PC connected to the
Quadro’s LAN.
Automatic Provisioning automatically detects and configures the
following settings on the Quadro:
•
WAN interface type (PPPoE or Ethernet)
•
WAN IP settings
•
PPP settings
•
ISP settings
•
DHCP settings
•
DNS settings
•
NAT Traversal settings
Fig. II-52: Auto Provisioning page
