QuadroFXO Manual II: Administrator's Guide
Quadro's Graphical Interface
QuadroFXO; SW Version 5.1.x
67
3. Accounting Settings
The Username field is dedicated for accounting services only. It is used to insert an identification username for accounting purposes. When no
username is specified in this field, the source username will be used for accounting.
The Send Accounting messages manipulation radio buttons group is used to select sending both Start and Stop accounting messages or only
Stop accounting message.
Voice Mail Common Settings
The Voice Mail Common Settings page is used to configure the Voice Mail recording codec.
The page consists of the Recording Codec drop down list
contains the existing codecs for voice mail compression.
Changing the Voice Mail recording codec will directly affect the
allocated memory size for users.
Fig. II-113: Voice Mail Coming Settings page
Dial Plan Settings
The Dial Plan Settings page is used to adjust the dialing
timeouts for the routing calls over Quadro.
This page consists of the only drop down list used to
configure the dialing timeout for the Routing calls. Values
selected in the lists indicate the interval between the
dialed number and it being applied to the network.
Fig. II-114: Dial Plan Settings page
System Hold Music Settings
The System Hold Music Settings allows you to define the hold music played to the PSTN party when it is held by the IP user. This page also allows
you to define the percentage of system memory dedicated to the uploaded hold music file. This page contains following components:
The Play Hold Music drop down list specifies the music played
to the PSTN party when it is held by remote IP user. It offers the
following options:
•
Off - no music will be played.
•
Local Music
– the hold music configured on the
Quadro will be sent to the remote PSTN party while it
is on hold.
•
Remote Music – music sent by the IP party will be
transparently passed to the PSTN user while it is held
by the IP party.
Restore Default Hold Music File enables the default hold
music. If the checkbox is selected, the text field Upload New
Hold Music File will be disabled.
Fig. III-115 Basic Services - Hold Music Settings page
The Upload New Hold Music File text field can be used to enter the path where the custom hold music file is located. If the hold music file is
browsed with the help of file-chooser, this field displays the path of the browsed file. The Browse button is used to browse for the hold music file.
The music file needs to be in PCMU wave format, otherwise the system will prevent uploading the file and will display the warning message "Invalid
audio file or format is not supported". Additionally, the system will refuse uploading if insufficient memory is available for the Quadro and will then
announce "You do not have enough space".
The Download Hold Music File link appears only if a file has been uploaded recently. It downloads the audio file to the PC and opens a window
where the saving location can be specified.
