QuadroFXO Manual II: Administrator's Guide
Administrator’s Menus
QuadroFXO; SW Version 5.1.x
84
More options can be added from this page, as well as settings
of the existing options can be modified. All options in the table
on this page are then sent to the DHCP clients.
The following functional buttons are available:
Add opens a page Add Entry page where a new DHCP
server option can be defined. The Add Entry page contains a
group of manipulation radio buttons to select between the
predefined DHCP server options or to define your own DHCP
server option:
•
Predefined - this selection allows you to select from
the predefined DHCP server options.
o
The Option Name drop down list contains the
most common DHCP server options.
o
The Option Value text field requires the value for
the selected option. The type and format of the
value inserted in this field is dependent on the
option selected from the Option Name drop down
list.
•
Custom - this selection allows you to define a new
DHCP server options. The following parameters are
required to be inserted for a new option:
Fig. II-152: DHCP Advanced Settings
o
The Option Code text field is used to insert a code of the option. It may have values in a range from 0 to 255.
o
The Option Value Type drop down list is used to select the type of the option value. It may be an IP address, a boolean or integer
value, etc.
o
The Option Value text field is used to insert the value of an option. Depending on the selected Option Value Type, this field should have
the corresponding value. Warning messages will prevent saving if the value inserted in this field does not correspond to the
requirements of the Option Value Type. If an array should be inserted here, the values should be separated with a comma.
Edit opens a page Edit Entry where existing DHCP server option settings can be modified. This page includes the same components like the Add
Entry page does.
The Special Devices table on this page allows you to set a static IP address binding on the MAC address of the device in the Quadro’s LAN. When
this table is configured, the devices with defined hostnames and MAC addresses will always get the same LAN IP address from the DHCP server.
Otherwise, devices not listed in this table will get dynamic LAN IP addresses. This table is also displayed in the
.
Add functional button opens an Add Host page where a
new static MAC address binding can be defined. The page
consists of the following components:
Hostname text field requires the hostname of the device in
the Quadro’s LAN.
MAC Address text fields require the MAC address of the
device in the Quadro’s LAN.
Static IP Address text fields require a fixed IP address of
the device in the Quadro’s LAN.
Please Note:
If you leave this field empty, the device in the
Quadro’s LAN will get the first available IP address from
range defined in the DHCP Settings page (see above).
Fig. II-153: Static MAC address binding – Add Host page
View DHCP Leases leads to the page where the DHCP leased LAN IP addresses are listed.
