QuadroFXO Manual II: Administrator's Guide
Administrator’s Menus
QuadroFXO; SW Version 5.1.x
82
Network Menu
Fig. II-146: Network menu in Dynamo theme
Fig. II-147: Network menu in Plain theme
DNS Settings
The DNS Settings page provides the option of setting up a
name server for the Quadro. It offers the following
components:
The Nameserver Assignment radio buttons are as follows:
•
The Dynamically by provider selection automatically
configures the assignment of the name server address
from the provider party.
•
Fixed Nameserver address is a manually selected name
server. The Nameserver text field requires the IP address
of an external name server. The Alternative Nameserver
text field requires the IP address of the secondary name
server. The Alternative Nameserver is used if the main
name server cannot be accessed.
Fig. II-148: DNS Settings page
DNS Server Settings
The DNS Server on the Quadro provides the services to the hosts in the Quadro’s LAN. With this service, Quadro returns the correct IP address to
the requested domain name, so that any device in the LAN can be accessed by its hostname or alternative alias name.
The DNS Server Settings page is used to configure DNS server settings on the Quadro and to define a list of aliases for the devices in the Quadro’s
LAN. This page contains the following components:
Zone field displays the Quadro’s host domain name as it is
configured in the
.
Time to live (TTL) text field indicates the time (in seconds)
during which the DNS server will keep the resolved names in its
cache. During this time the same address will be resolved from
the cache of the DNS server. When this timeout expires, the
requested address will be resolved newly.
Mail Exchange (MX) text field indicates the mail server’s
hostname. When resolving the email address, the reference will
go to the mail server defined in this field, before being sent out
to the external network. The value in this field will be used in the
MX record in the DNS server on the Quadro.
The table on this page lists aliases for each of the device in the
Quadro’s LAN to be resolves through the DNS server.
Fig. II-149: DNS Server Settings page
