Manual-I: Installation Guide for QX Gateway
Revision 1.2
7
3 Hardware Overview
QXFXO4 has 4 FXO ports, 1 Ethernet WAN and 1 Ethernet LAN ports.
QXISDN4 has 4 ISDN ports, 1 Ethernet WAN and 1 Ethernet LAN ports.
QXE1T1 has 1 E1T1 port, 1 Ethernet WAN and 1 Ethernet LAN ports.
QXFXS24 has 24 phone ports (FXS), 1 Ethernet WAN and 1 Ethernet LAN ports.
3.1 The Panel of QX Gateways
Below are presented the front and back panels:
1.
WAN RJ45 socket to attach the Internet Uplink (WAN)
via an Ethernet CAT5 cable.
2.
LAN RJ45 socket to attach the IP phone to the QX’s
LAN via an Ethernet CAT5 cable. Use a switch to con-
nect multiple IP phones.
3.
The reset button may be used in two ways:
Pressing for an instant to initiate a normal restart.
Pressing and holding down for three seconds or more
to carry out a factory reset. This will clear all settings,
including the QX IP address and the changed admin
password, and restore the default configuration.
4.
Line sockets to connect the QXFXO4 to the PSTN net-
work using standard analog phone service. These are
Foreign Exchange Office (FXO) analog ports.
Figure 1: QXFXO4's Front Panel
Figure 3: QXISDN4's Front Panel
Figure 2: QXE1T1's Front Panel
