18
9. Internet connection
The configuration of the MAX! System requires a local
connection to the home network (LAN) and an existing
power supply to the MAX! Cube. To use your smartphone
or notebook to establish a connection via the MAX! Por-
tal, Internet access must also be enabled.
You should use the USB main adapter supplied
with the device for a permanent power supply to
the MAX! Cube.
10. Restoring the factory settings
The MAX! Cube can be reset to the initial state manually.
When the initial state is restored, all information about
taught-in devices and all settings made are lost and
cannot be retrieved.
Start by disconnecting the MAX!
•
Cube from the power supply.
Wait 1 minute.
•
Then press and hold down the
•
Reset button (b).
At the same time, reconnect the
•
MAX! Cube to the power supply.
Still hold down the Reset button.
•
The Power LED lights up and begins
to flash.
The Power LED stays lit now.
•
The factory settings are restored.
•
Summary of Contents for MAX! Cube
Page 42: ...42 ...
Page 43: ...43 ...
Page 44: ...44 eQ 3 AG Maiburger Straße 29 D 26789 Leer www eQ 3 com ...
