SECURE-GRIP HYDRAULIC FLANGE SPREADERS
OPERATOR INSTRUCTION MANUAL
PAGE 28
3UREOHP$SDLURIFROOHWVDUHMDPPHGLQDEROWKROH
¬
A collet which is too
VPDOORUODUJHKDVEHHQ
selected, or the collet
KDVEHHQLQVHUWHGLQWR
a damaged or non-
URXQGEROWKROH
7KHÀDQJHPXVWEHVSUHDGEHIRUHUHPRYDOFDQEHDWWHPSWHG7KLVFDQEHGRQHXVLQJ
DQRWKHUSDLURI6HFXUH*ULSWRROVRUDQRWKHUPHWKRGLIDYDLODEOH5HPRYDOFDQWKHQEH
achieved as follows:
1.
2QERWKVLGHVSXOOWKHFROOHW
spring plunger ring out, and
remove the rest of the tool,
leaving the collet head
DVVHPEOLHVLQWKHEROWKROH
2.
2QERWKVLGHVXQVFUHZWKH
drive nut and remove the
drive cone and collet cone
3. On the left-hand side, screw
WKHGULYHQXWEDFNRQWRWKH
collet holder until it is 1-
2mm off the end
4. Using a hammer and a
VXLWDEOHGULIWPRYHWKH
collet holder until it is
SRVVLEOHWRFXWRIIWKH
tapered end of the collet
holder
5. Cut off the tapered end with
a hack saw or other cutting
tool
6. Withdraw the collet holder
IURPWKHEROWKROH
7. Using a hammer and a
VXLWDEOHGULIWPRYHWKH
collet holder on the right-
hand side up to the left-
hand side collet and drive
it out
8. Drive the right-hand side
collet out using the collet
holder
2mm
CUT HERE
Summary of Contents for SG13TE
Page 2: ......
