www.prolight.co.uk
Blitzer II Strobe
User Manual
7
Operating instructions
Master/slave mode:
To set the master unit, select your desired program (sound active, auto, strobe or fade modes).
To set the other units in slave mode, press the
“MENU”
button on the front of the unit to show
SLAU
on the LED display. Press the
“ENTER”
button to confirm the setting. The unit will now run in sequence
with the master unit. To exit out of any of the above options, press the
“MENU”
button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Strobe mode:
To access the strobe mode, press the
“MENU”
button on the front of the unit to show
C000
on the
LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose
C1.00
.
Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select the brightness between
00
~
99
.
Value: 00 - 99 (00 = low, 99 = high).
Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose
CF.00
. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons
to select the strobe speed between
00
~
99
. Press the
“ENTER”
button to confirm the setting.
Value: 00 - 99 (00 = slow, 99 = fast).
To exit out of any of the above options, press the
“MENU”
button.
Fade mode:
To access the fade mode, press the
“MENU”
button on the front of the unit to show
FA00
on the LED
display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose
FA.00
.
Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select the fade speed between
00
~
99
.
Value: 00 - 99 (00 = slow, 99 = fast).
Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose
FF.00
. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons
to select the strobe speed between
00
~
99
. Press the
“ENTER”
button to confirm the setting.
Value: 00 - 99 (00 = slow, 99 = fast).
To exit out of any of the above options, press the
“MENU”
button.
Auto mode:
To access the auto mode, press the
“MENU”
button on the front of the unit to show
AUTO
on the
LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select the auto
program speed between
00
~
99
. Press the
“ENTER”
button to confirm the setting.
Value: 00 - 99 (00 = slow, 99 = fast).
To exit out of any of the above options, press the
“MENU”
button.
Sound/sound sensitivity:
To access the sound mode, press the
“MENU”
button on the front of the unit to show
SOUN
on the
LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select the sound
sensitivity between
00
~
99
. Press the
“ENTER”
button to confirm the setting.
Value: 00 - 99 (00 = low, 99 = high).
To exit out of any of the above options, press the
“MENU”
button.