www.prolight.co.uk
Fusion 100 Spot
User Manual
6
Operating instructions
DMX mode:
Operating in a DMX control mode environment gives the user the greatest flexibility when it comes
to customising or creating a show. In this mode you will be able to control each individual trait of
the fixture and each fixture independently.
To access the DMX address mode, press the
“MENU”
button on the front of the unit to show
A001
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the required DMX address. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
DMX channel mode:
To access the DMX channel mode, press the
“UP”
button on the front of the unit to show
CHNd
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose
one of the 5 or 15 DMX channel modes. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
PLEASE NOTE:
When the unit is receiving DMX the first red dot on the display will flash.
5 channel mode:
Channel
Value
Function
CH1
000-255
Pan adjustment 0-540°
CH2
000-255
Tilt adjustment 0-210°
CH3
000-007
No function
008-047
LED Macro 1
048-087
LED Macro 2
088-127
LED Macro 3
128-167
LED Macro 4
168-207
LED Macro 5
208-247
LED Macro 6
248-255
Sound active
CH4
000-007
No function
008-058
Pan/tilt Macro 1
059-110
Pan/tilt Macro 2
111-162
Pan/tilt Macro 3
163-240
Pan/tilt Macro 4
241-255
Sound active
CH5
000-050
No function
051-100
High speed motor movement
151-200
Low speed motor movement
251-255
Reset (10 seconds)