www.prolight.co.uk
Fusion 100 Spot
User Manual
8
Pan/tilt speed setting:
To access the pan/tilt speed setting, press the
“UP”
button on the front of the unit to show
SPNd
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose
between
HISP
(fast) or
LoSP
(slow). Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Master/slave mode:
To set the master unit, press the
“UP”
button on the front of the master unit to show
SLNd
on the LED
display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose
Nast
. Press
the
“ENTER”
button to confirm the setting. Then select your desired program (sound active or one of the
show modes).
To set the other units in slave mode, press the
“UP”
button on the front of the unit to show
SLNd
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose
either
SL 1
. Press the
“ENTER”
button to confirm the setting. The unit will now run in sequence with
the master unit.
To exit out of any of the above options, press the
“MENU”
button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Show mode:
To access the show modes, press the
“UP”
button on the front of the unit to show
ShNd
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose
between
SH 1
~
SH 4
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
SH 1
– full show
SH 2
– slow show 1
SH 3
– slow show 2
SH 4
– forward facing show
Sound/sound sensitivity:
To turn the sound mode on or off, press the
“UP”
button on the front of the unit to show
Soun
on the
LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose between
on
or
oFF
. Press the
“ENTER”
button to confirm the setting.
To adjust the sound sensitivity, press the
“UP”
button on the front of the unit to show
NIC
on the
LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose between
000
~
100
.
Value: 000 - 100 (000 = low, 100 = high)
To exit out of any of the above options, press the
“MENU”
button.
Operating instructions