www.prolight.co.uk
Fusion 100 Spot
User Manual
9
Operating instructions
Pan invert setting:
To access the pan invert setting, press the
“UP”
button on the front of the unit to show
PAn
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose
between
on
or
off
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Tilt invert setting:
To access the tilt invert setting, press the
“UP”
button on the front of the unit to show
tIL
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose
between
on
or
off
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Display invert setting:
To access the display invert setting, press the
“UP”
button on the front of the unit to show
dISP
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose
between
on
or
off
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Reset factory settings:
To reset the units factory settings, press the
“UP”
button on the front of the unit to show
rFAC
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose
between
on
(reset) or
ofF
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Pan/Tilt/Zoom home position:
To access the pan/tilt/focus home position setting, press the
“UP”
button on the front of the unit to
show
Ad t
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
dELE
(default home position),
P
(pan home position),
t
(tilt home position),
C
(colour),
g
(gobo),
F
(focus home position), and
r
(rotation home position).
When on
dELE
, press the
“ENTER”
button and the units home positions will be reset to the factory
default (
000
).
When on
P
,
t
,
C
,
g
,
F
or
r
, press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to
adjust the value between
000
~
120
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Motor reset:
To reset the motors, press the
“UP”
button on the front of the unit to show
rSt
on the LED display.
Press the
“ENTER”
button to perform the reset.
To exit out of any of the above options, press the
“MENU”
button.
