www.prolight.co.uk
Party Par
User Manual
4
Operating instructions
DMX channel selection:
Operating in a DMX control mode environment gives the user the greatest flexibility when it comes to
customising or creating a show. In this mode you will be able to control each individual trait of the fixture
and each fixture independently.
To access the DMX channel mode plug in the fixture via the XLR connections to a DMX controller. Set your
desired DMX address following the set-up specifications that come with your DMX controller.
Channel 1, 2, and 3 will not work when channel 4 is being used. When the units are daisy chained
together in DMX mode, channel 1, 2 and 3 must be
“OFF”
for units to sync together when using
channel 4.
When the value of channel 6 is between 32 and 127, you must be using either channel 1, 2 or 3, or all
three combined.
When using channel 6, channel 5 will control the speed of the colour changing.
6 channel mode:
Channel
Value
Function
1
0-255
Red (0: low brightness, 255: high brightness)
2
0-255
Green (0: low brightness, 255: high brightness)
3
0-255
Blue (0: low brightness, 255: high brightness)
4
0-7
Blackout
8-255
Colour macro
5
0-15
Blackout
16-255
Strobe
6
0-31
Blackout
32-63
Dimming (32: dim, 63: bright)
64-95
Dimming (64: bright, 96: dim)
96-127
Dimming (96: dim, 112: bright, 127: dim)
128-159 Colour mixing
160-191
3 Colour change
192-223 7 Colour change
224-255 Sound active (sensitivity adjustment knob)
